Hall Current Sensor HIEM-DC-500J

For the electronic measurement of currents: DC, AC, pulsed, mixed, with a galvanic isolation between the primary circuit (high power) and the secondary circuit (electronic circuit).

Datasheet PDF

Electrical Data

TYPE		DC- 50J	DC- 100J	DC- 200J	DC- 300J	DC- 500J
parameter	sign
Primary nominal (r.m.s. current)	IPN	50A	100A	200A	300A	500A
Primary current measuring range	IP	0～ 100A	0～ 200A	0～ 400A	0～ 600A	0～ 1000A
Secondary nominal RMS voltage	VSN	5V±0.5% DC
Supply voltage	VC	±15V±5% DC
Zero offset voltage @ IPN =0, TA = 25°C	V0	within25mV DC
Thermal drift of offset voltage @IPN =0	VOT	±1mV/°C
Linearity of VSN at IPN =F.S	εL	±0.5%
Response time	Tr	<7μs
R.m.s. voltage for AC isolation test	Vd	2.5KV/50Hz/1min
R.m.s resistance for DC isolation test	/	10MΩ/500V/1min
Ambient operating temperature	Ta	-10～+80°C
Ambient storage temperature	Ts	-15～+85°C

Dimension (mm)

Features

Opened loop (compensated) multirange current sensor using the Hall effect
Excellent linearity for exact
No insert losses

Applications

AC variable speed drives and serve motor drives
Uninterruptible Power Supplies (UPS)
Power supplies for welding
Power supplies for welding applications.
Communication supplies applications

Pin Identification

+...positive power -...negative power M...output OFS...zero adjustment GIN...range adjustment